SBM rotary washing the sand is the perfect substitute for moderni

The production technique is done dry. A rotary kiln (φ3.5 × 54m) production line with preheater cyclones and five floors from the decomposition of the furnace is adopted.

The scale of production and capacity: The capability is 1500 t / d clinker, while 500 000 tonnes / year of Portland cement when together gypsum.

Types of cement: The technology and equipment adopted can produce the categories and 32.5MP 42.5MP cement depending on Chinese standard GB175-1999. They usually are adjusted according to market demand.

Main technical characteristics

This production line adopts advanced technology and equipment inside the 1990s to raise the technical level and also to provide assistance with the design. New five stages with the cyclone preheater system for efficient beam grate cooler air, multi-pass pulverized coal burner, the temperature from the heat fan Davison Luqi BS930 electrostatic precipitator, and the board of elevator chain conveyor chain adopted in this particular production line can guarantee that the technology is advanced in comparison to other production lines with similar scale.

If it won't have bad influences for the completeness, continuity and reliability, the procedures are going to be simplified to further improve the management processes of production, reduce disruption and reduced investment.

Measures were taken up save energy and reduce consumption. while using the lift and pull the chain leading in the air, system reliability is enhanced as well as transport is reduced.

A new production line dry which includes a capacity of 1500 tons each day clinker built. A rotary kiln (φ3.5 × 54m) will be used like a combustion product. Preheater five cyclone stages of decomposition and also the oven will probably be adopted with the entrance on the oven.

Limestone Crushing

Hammer crusher is used for step crushing limestone. Such type of mill would work for crushing ore of medium strength such as limestone, Marlita, slag, gypsum and coal. They can crush the ore to your large size required. Also, it may crush the ore that has moisture inside it and also the earth, it adopts the doors of discharge inside the same direction. They have the distinction of special protection in the way to obtain iron, which often can not overwrite metals bounce inside the crib, so that your operator aren't able to stop it whether or not this offers include noise cope with this matter.

Limestone crusher hammer crusher adopting TKPC16.18 final stages. Power is definitely the dimensions of 800mm, capacity will be the use 380T / h and annual is25.51%.

For 1500t / d cement production line, the device is available in a HRM2800m mill.

Cement grinding

Twoφ3.5 x 13m model cement tube mills equipped SEPA 1500 model without air separator will be adopted for cement grinding. Its capacity is 50 t / h per set.