Types of scale of production, cement production as well as the method

The production technique is performed dry. A rotary kiln (φ3.5 × 54m) production line with preheater cyclones and five floors of the decomposition of your furnace is adopted.

The scale of production and capacity: The ability is 1500 t / d clinker, while 500 000 tonnes / year of Portland cement when combined with gypsum.

Types of cement: The technology and equipment adopted can produce the types and 32.5MP 42.5MP cement as outlined by Chinese standard GB175-1999. They might be adjusted depending on market demand.

Main technical characteristics

This production line adopts advanced technology and equipment from the 1990s to make the technical level in order to provide assistance with the structure. New five stages of your cyclone preheater system for efficient beam grate cooler air, multi-pass pulverized coal burner, the temperature with the heat fan Davison Luqi BS930 electrostatic precipitator, and the board of elevator chain conveyor chain adopted with this production line can ensure that the technology is advanced in comparison with other production lines with just one scale.

If no have bad influences for the completeness, continuity and reliability, the procedures might be simplified to increase the management processes of production, reduce disruption and lower investment.

Measures were delivered to save energy and minimize consumption. while using lift and pull the chain leading with the air, system reliability has been improved and energy transport is reduced.

A new production line dry that has a capacity of 1500 tons each day clinker built. A rotary kiln (φ3.5 × 54m) is going to be used for a combustion product. Preheater five cyclone stages of decomposition and the oven shall be adopted within the entrance of the oven.

Limestone Crushing

Hammer crusher is commonly employed for step crushing limestone. This particular mill is proper for crushing ore of medium strength for instance limestone, Marlita, slag, gypsum and coal. They can crush the ore for the large size required. Additionally, it may possibly crush the ore that's moisture in it as well as earth, it adopts the doors of discharge while in the same direction. They have the difference of special protection inside the cause of iron, which may not overwrite metals bounce during the crib, so that the operator cannot stop it if this offers include noise handle this matter.

Limestone crusher hammer crusher adopting TKPC16.18 final stages. Power is the scale of 800mm, capacity is definitely the use 380T / h and annual is25.51%.

For 1500t / d cement production line, the system will come in a HRM2800m mill.

Cement grinding

Twoφ3.5 x 13m model cement tube mills equipped SEPA 1500 model without air separator is going to be adopted for cement grinding. Its capacity is 50 t / h per set.