vibrating screen - Double Eccentric Shaft Systems

Primary Screen - Double Eccentric Shaft Systems

The NCLASSwhat type of crusher is suitable for crushing coal

The TYCAN N-Class is commonly used as a main screen directed at escalating the throughput along with the effi- ciencies with the principal crusher in really durable and aggressive environments. Equipped to handle particles as large as 78" x 39" x 39" and screening at cut sizes of ½" to 12" it really is ideal for really demanding industries like mining or crushed stone.

This operation principle consists with the usage of a shaft and 4 bearings. The vibration motion is worked into the shaft in type of single eccentricity, permitting for equipment operation with consistent amplitude, independent with the load fed towards the screen.

Due to the constant dynamic operating conditions and therefore the very high G-Forces generated by the technical principle of the vibrating screen, product particles are regularly launched out with the classification openings in the media producing a self-cleaning effect, which minimizes material clogging and pegging.

PRINCIPAL CHARACTERISTICS:

• Consistent amplitude


• Constant dynamic, load independent operating circumstances,


• Adjustable frequency


• Dry and humid classification


• Cuts of up to around 12"


• High classification capacity and greater classification efficiencies


• Use of perforated plates as much as 4" with conical opening as classification media


• Allows for a variety of classification deck configurations


• Allows for that classification of viscous and sticky products


• Does not transmit vibrations in to the structure


• Width of up to 8 ft.


• Length of as much as 22 ft


• Optional complete or partial dust enclosure


• Allows for instant stoppage (either by electric brake or by reversal) eliminating residual vibrations

Double Eccentric Shaft Systems

The F-CLASS

The TYCAN F-CLASS will be the number one vibrating screen for classification in the heavy mining, mineral and crushed stone industries. The positive circle-throw motion from the F-CLASS is developed by way of a counterbalanced double eccentric shaft, that is sustained by 4 double spherical roller screen bearings. Rubber mounting units dynamically balance by isolating the vibrating physique in the stationary base frame. The shaft is supported about the base by side arm assemblies that are also isolated on rubber mounting units.

The F-CLASS totally free floating action permits the shaft to find its natural center of rotation without strain or thrust on the bearings. This feature minimizes upkeep and downtime and prolongs living of the bearings.

PRINCIPAL CHARACTERISTICS:

• Consistent amplitude


• Constant dynamic, load independent operating conditions


• Adjustable frequency at speeds of 750 to 1050 RPM


• Dry and humid classification


• Solid HUCK™ bolted construction


• "Hands Free" tube housing assembly for simple bearing exchange


• Allows for different classification deck configurations of up to three decks


• Allows for the classification of viscous and sticky products


• Does not transmit vibrations in to the structure


• Installed at angles of 15 to 25 degrees


• Width of up to 8 ft (2500mm)


• Length of up to 24 ft (7500mm)


• Optional full or partial dust enclosure


• Optional ball tray for classification of fine and sticky material

Concentric Shaft Systems

The T-CLASS

The TYCAN T-CLASS vibrating screen with field verified functions makes it an adaptable performer. It really is designed to be a rugged dependable vibrating screen to use in the screening of a wide assortment of materials.

The circle throw motion from the T-CLASS Series is developed by way of a counterbalanced shaft assembly, which can be supported by two double spherical roller screen bearings. The circle throw action has confirmed to be very effective in moving coarse material to the top rated in the bed so that the fines and near mesh particles may possibly pass by way of the media openings.

The T-CLASS Series supplies rapidly and accurate sizing of supplies.

The T-CLASS Series modular style and the use of normal components outcome in savings because TYCAN fabricates and assembles machines customized to the application by using normal stock elements. This standardization of elements also results in readily offered spare parts.

The T-CLASS straightforward style coupled with its rugged building outcomes in minimum upkeep and downtime.

PRINCIPAL CHARACTERISTICS:

• Extremely versatile and upkeep friendly


• Easy modify of Amplitude


• Adjustable frequency at speeds of 750 to 1050 RPM


• Dry and humid classification


• Solid HUCK™ bolted construction


• "Hands Free" tube housing construction for simple bearing exchange


• Cut sizes from 6 inches to twenty mesh


• Allows for various classification deck configurations of up to 4 1⁄2 decks


• Installed at angles of ten to 25 degrees


• Width of up to 8 ft


• Length of up to 24 ft


• Optional full or partial dust enclosure


• Optional ball tray for classification of fine and sticky material


• Optional Twin Shaft Assembly for Durable Applications