High-Quality Rail Track Ballast Recycling Plant

Plant Description

The rail track ballast recycling plant continumobile crushing for sale in uaees to be developed to process old ballast recovered from rail tracks to generate a cloth equally as great as new track-laying material. This kind of recycling process demands selective therapy to make sure the granulation with the finish item is only minimally much less than that of the feed material. Quite simply, the principal process just isn't the comminution with the material but rather the generation of your clean, high-grade item.

The plant consists of two units - the feeding & screening unit as well as the crusher. Each unit is mounted on a crawler chassis and will be moved individually, that end both units have their own own power generators.

Road transport is effected by low-loader. The weights and dimensions with the plant unit enable flexibility to move minus the requirement for any special transport license. On-site, the 2 units are moved together and connected electrically using standard plug connections. The recycling plant is fed by wheeled loader. The feed material is conveyed by from your feed hopper by way of a variable-drive vibro dosing chute to a eccentric screen unit, where the oversize > 63 mm and also the fines < 12 mm are separated from the material flow and discharged by way of a rejects belt. The thus pre-treated fraction 12 - 63 mm is then fed for further processing towards the impact crusher, upstream which a ferrous metal separator is installed. Pursuing the selective crushing process in the impactor, the product could be conveyed to some mobile screening unit for separation at 25 mm and 12 mm. In this way, a clean, high-grade item 25 - 63 mm ideal for use as ballast is generated, together with fractions 0 - 12 mm and 12 - 25 mm, which can also be re-used with regards to the degree of impurity.

Technical Data - Feeding & Screening Unit

Feed material: Recovered rail track ballast

Feed size: 0 - 63 mm, individual rocks up to about 300 mm

Capacity: approximately 150 t/h with regards to the feed material and level of contamination

Pre-separation: Eccentric screen; separation at 63 mm and 12 mm

Installed power: 33 kVA diesel generator

Total weight: 30,500 kgs

Technical Data - Crusher

Feed size: 12 - 63 mm

Crusher: Impactor Type AP-K 1010

Inlet: height 350 mm width 1,120 mm

Installed power: 90 kW

Crusher item: 0 - 63 mm

Installed power: 300 kVA diesel generator

Total weight: 31,500 kgs