Double-Toggle & Single-Toggle Jaw Crushers
Double Toggle jaw crusher Product Details
Double Toggle Jaw Crusher of our design have quite a few special features for continuous crushing the angle between the two Jaws has to be smaller than the angle of the nip. The lesser the angle between two Jaws than the angle of nip, the lesser the slippage between Jaws and materials, and hence less wear on Jaw plates. Theoretically parallel Jaws for example, when angle between two Jaws is zero would provide the ideal conditions with absolutely no slippage. Naturally with these types of Jaws no continuous crushing can take place. But one can do very close to this condition, by suitably designing the crusher mechanism.
Our design is reduce the slipping tendency to the bare minimum. Our Swing Jaw stock and the location of Hinge Pin point on the centre line of the crushing zone ensure that the motion of the Jaw plates is squarely against the material. The material is gripped and crushed immediately and there is no rubbing action. The running cost of the Jaw crusher replacement of the Jaw plate is expensive. Due to the above design features due to friction, the wear of our Jaw plate is minimized, so the Jaw plates last much longer which makes the crusher more economical.
Double Toggle Jaw Crusher Salient Feature
There are some additional special features also in this design:
The Pitman is light which enable the crusher to run faster, and naturally the through put is higher. The Pitman being light the crusher required less power and all this makes our crusher more economical.
The main body itself is light sturdy and fabricated construction. The Pitman, Toggles, Bearing Seats, Eccentric Shaft and the Main Bearing are all enclosed by dust sealed covers and are lubricated by continuous oil circulation.
The arrangement of Jaw setting is provided on Stationery Jaw stock side instead of Swing Jaw stock. There by, the geometric of the Toggles remains undisturbed by the variation in Jaw setting and the crusher can always work with maximum efficiency.
Another unique feature is safety device. Incase of accidental overloads the safety device disengage the driven pulley then runs only as a lose pulley. The machine is there by protected against damages.
0 comentarios